Applicable to:
Construction
Warehousing

White Card Online in QLD, NT and Tasmania: How the Rules Differ

White Card Online in QLD, NT and Tasmania: How the Rules Differ

Table of Contents

Sharon McCulloch

You can do your white card online in Queensland and the Northern Territory, but only as a live class with a trainer on screen, through a provider the regulator has approved. Self-paced courses are not accepted in either. Tasmania works differently: WorkSafe Tasmania sets no delivery-mode rule and instead requires the training to be completed in Tasmania. This ensures that you are properly trained to obtain your white card online qld.

Search “white card online” and you will find plenty of cheap, fast courses. Whether the card at the end is worth anything depends on where you will be working. The unit is the same everywhere, CPCWHS1001 Prepare to work safely in the construction industry, but each state and territory decides how it can be delivered, how long it must run and who hands you the card.

When searching for a course, consider options that specifically mention white card online qld to ensure compliance with local regulations.

This guide compares Queensland, the Northern Territory and Tasmania side by side: online and live delivery rules, course hours, what you receive at the end, what it costs and how long it takes. Every rule below comes from official government pages, checked in October 2026. For the national picture, see our guide to whether you can do your white card online. For those in Queensland, options for obtaining a white card online qld are available and should be explored.

Importance of the White Card Online QLD: The white card is essential for anyone looking to work in the construction industry in Queensland, making white card online qld a convenient option for obtaining this certification.

Key Takeaways

  • Queensland: live online training is allowed where the RTO is approved, for learners physically located in Queensland. It needs at least 4.5 hours of training and no more than 15 students per trainer. Your RTO issues the card once you pass.
  • Northern Territory: live online training (called connected real-time delivery) has been approved since 1 July 2026. Self-paced e-learning is not accepted. The card costs $31 from the Territory Business Centre.
  • Tasmania: training must be with an RTO and completed in Tasmania. You lodge your application in person at Service Tasmania ($13.72), and the card can take up to 60 days.
  • Moving between them: each recognises the others’ cards, with conditions. Tasmania accepts Queensland white cards issued after June 2009, and the NT accepts interstate cards that are still valid where they were issued.
white card training

White card rules in QLD, NT and Tasmania at a glance

The biggest differences are not in the course itself but in what surrounds it: who approves live online delivery, where you must be when you train, whether there is a minimum course length and who issues the card. Put simply, Queensland controls both how and where you train, the NT controls only how, and Tasmania controls only where.

QueenslandNorthern TerritoryTasmania
RegulatorWorkplace Health and Safety Queensland (WHSQ)NT WorkSafeWorkSafe Tasmania
Self-paced online courseNot acceptedNot acceptedNo rule published
Live online (Zoom, Teams)Allowed where the RTO is approvedApproved from 1 July 2026, with listed RTOsNot addressed by the regulator
Where you must bePhysically in QueenslandNo rule publishedTraining must be completed in Tasmania
Minimum course length4.5 hours of trainingNone publishedNone published
Class size limit15 students per trainerNone publishedNone published
Minimum age13None published14
Who issues the cardYour RTOTerritory Business CentreWorkSafe Tasmania, via Service Tasmania
Card feeSet by the RTO, usually in the course price$31$13.72
Deadline to applyNot applicable, the RTO issues the card60 days from your training certificate60 days from training
How you applyNo application neededOnline, in person, email or postIn person at Service Tasmania
Time to receive cardIssued by your RTO once you pass (posted if you train online)Online applications within 20 business daysUp to 60 days
Digital cardNot mentioned by the regulatorAvailable since 1 June 2022Not mentioned by the regulator

Sources: WorkSafe Queensland, WHSQ GCIT Conditions v6.1, NT WorkSafe, NT.GOV.AU, WorkSafe Tasmania and Service Tasmania. Fees retrieved 7 October 2026.

Can you do your white card online in Queensland?

Benefits of Taking Your White Card Online QLD

Yes, as a live class with an RTO that WHSQ has approved for connected real-time delivery, while you are physically in Queensland. Self-paced courses are not accepted.

WorkSafe Queensland’s general rule is that you “need to complete face-to-face training with a Registered Training Organisation” (WorkSafe Queensland, retrieved 7 October 2026). WHSQ treats live online delivery as a form of face-to-face training, allowing it “via connected real time delivery (CRTD) where an RTO is approved to do so” (WorkSafe Queensland eSafe, 25 November 2022).

Queensland sets the most detailed rules of the three. Under the conditions WHSQ places on approved RTOs (version 6.1, effective 25 July 2023), a live online course must:

  • let the trainer and students see each other and interact in real time
  • include no pre-training requirement
  • include no self-paced learning
  • include no pre-recorded trainer videos or teaching content (educational videos showing construction sites are allowed)

The same conditions require the RTO to deliver only to students physically located in Queensland, cap classes at 15 students per trainer, require at least 4.5 hours of training (not counting registration, identity checks or breaks), set a minimum age of 13, and require every RTO to use the assessment WHSQ provides (WHSQ GCIT Conditions v6.1). RTOs must also notify WHSQ of each course at least 24 hours before it starts (WorkSafe Queensland eSafe).

Getting the card. This is Queensland’s biggest difference. There is no separate government application. Once you pass, “the RTO will issue you with your general construction induction training card” (WorkSafe Queensland). The card must be laminated and show your name, date of birth, signature, RTO number and issue date (WHSQ GCIT Conditions v6.1).

If you lose it, you go back to the RTO that issued it, or to another Queensland RTO if that one is no longer operating. Keep a note of your RTO’s details, as WorkSafe Queensland recommends, because you will need them for a replacement.

White Card Training Darwin provider - First Aid Pro
Construction Induction White Card training course

Can you do your white card online in the NT?

Yes, as a live class with an approved provider, since 1 July 2026. Self-paced online courses are still not accepted.

NT WorkSafe approved connected real-time delivery from 1 July 2026. It defines this as online training “delivered through live video streaming or conferencing platforms such as Zoom, Skype or Teams” that “requires real-time interaction between a learner and trainer”, and states that it “is not self-paced online e-learning” (NT WorkSafe, retrieved 7 October 2026).

That is a real change. As recently as April 2025, NT WorkSafe warned that “online training is not recognised or accepted in the Northern Territory” (NT WorkSafe news, 22 April 2025). Not every government page has caught up. At the time of writing, the NT.GOV.AU application page still says training must be done face to face and that online training courses are not recognised (NT.GOV.AU). NT WorkSafe is the regulator and its page sets out the current approval. If the two pages leave you unsure, confirm with NT WorkSafe before you book.

Choose your provider from the list. NT WorkSafe publishes its approved white card training providers, with a separate filter for connected real-time training. A provider approved for classroom delivery is not automatically approved for live online delivery, so check the online filter specifically.

Getting the card. After training, you apply to the Territory Business Centre within 60 days of your training certificate being issued. You can apply online, in person, by email or by post. A new or replacement card costs $31, and online applications are processed within 20 business days (NT.GOV.AU). If you apply online, you can also ask for a digital white card that sits in Apple Wallet or Google Pay. NT WorkSafe still encourages workers to carry the physical card, because digital cards may not be accessible at sites where phones are banned or there is no coverage (NT WorkSafe).

Training in Darwin? We run face-to-face white card training in Darwin as well as live online sessions.

Can you do your white card online in Tasmania?

WorkSafe Tasmania does not say yes or no to online delivery. Its rule is about where, not how: the training must be delivered by an RTO and “must be completed in Tasmania” (WorkSafe Tasmania, retrieved 7 October 2026). When you apply, your statement of attainment must confirm you completed the course in Tasmania.

Our reading of that rule, in practice:

  • If you are not in Tasmania, an online course is unlikely to get you a Tasmanian card, because you would not be completing the training in Tasmania. If you already hold a valid card from another state that Tasmania recognises, you do not need a Tasmanian one.
  • If you are in Tasmania, check with WorkSafe Tasmania before paying for any online option. The regulator has not published a position on online or live delivery, so confirm before you book.

WorkSafe Tasmania says it is the applicant’s responsibility to check that the RTO has CPCWHS1001 on its scope for delivery in Tasmania, and points you to training.gov.au to check.

Getting the card. Tasmania is the only one of the three where you must lodge your application in person. You take a completed application form, your statement of attainment and your evidence of identity to a Service Tasmania service centre within 60 days of training. The fee is $13.72 for a new or replacement card, and you must be at least 14 (Service Tasmania, retrieved 7 October 2026). Service Tasmania forwards it to WorkSafe, and if the card has not arrived within 60 days, you call WorkSafe.

Two details catch people out. If you miss the 60-day window, you need a written declaration from your RTO confirming you passed. And Service Tasmania will only replace a card that Tasmania issued. If your card came from another state, you replace it there.

We run face-to-face white card courses in North Hobart. See our white card course in Tasmania for dates.

How long is a white card course in QLD, the NT and Tasmania?

Only Queensland sets a minimum: 4.5 hours of actual training. Neither NT WorkSafe nor WorkSafe Tasmania publishes a minimum course length.

That does not mean a course can be over in an hour elsewhere. All three require the same nationally recognised unit, CPCWHS1001, delivered and assessed by an RTO. The unit covers work health and safety law and your duty of care, identifying hazards and controlling risks, safety signs and PPE, incident and emergency procedures, and how to raise safety concerns on site.

Our face-to-face white card course runs for six hours in a single day, assessment included.

Be wary of any course that promises to be finished in under an hour, wherever you are. Delivering and assessing CPCWHS1001 properly takes time.

What card do you get, and does it work interstate?

All three issue a general construction induction card, commonly called a white card, and each recognises the others’ cards, with conditions: the NT accepts interstate cards that remain valid where they were issued, and Tasmania accepts Queensland white cards issued after June 2009.

  • WorkSafe Queensland accepts cards issued by other states and territories, and says Queensland cards “are also accepted throughout Australia” (WorkSafe Queensland).
  • NT WorkSafe recognises all interstate cards that remain valid in the issuing state, and states that “NT white cards are accepted by all jurisdictions” (NT WorkSafe bulletin).
  • WorkSafe Tasmania states that “all cards issued after successfully completing the national unit of competency (CPCWHS1001) will be recognised in Tasmania”. Its state-by-state list adds that Queensland white cards issued after June 2009 and all Queensland blue cards are recognised, as are all NT cards (WorkSafe Tasmania).

So if you train in Brisbane and take a job in Darwin or Launceston, you do not need a second card, provided your Queensland card was issued after June 2009. You do need to replace a lost card in the state that issued it.

The two-year rule. White cards carry an issue date rather than an expiry date, but a long break from the industry can matter. NT WorkSafe states that you may need to redo the training if you have not carried out construction work in the preceding two years. In Queensland, the two-year test appears in the replacement process: to get a replacement card, you declare that you have carried out construction work in the past two years (WHSQ GCIT Conditions v6.1). WorkSafe Tasmania’s white card page does not mention a two-year rule. Our guide to whether white cards expire covers this in more detail.

White Card Training Darwin - First Aid Pro
White Card Darwin NT provider

How to check an online white card provider before you pay

A few minutes of checking saves you paying twice.

  1. Check the RTO is registered at training.gov.au and has CPCWHS1001 on its scope. Ours is RTO 31124.
  2. Check the regulator approves it for live online delivery. In Queensland, check WHSQ’s list of approved RTOs, linked from the WorkSafe Queensland white card page. In the NT, look for the provider on NT WorkSafe’s list under connected real-time training. In Tasmania, confirm with WorkSafe Tasmania before booking anything online.
  3. Check the course is live. If the booking page talks about modules you complete “in your own time” and there is no scheduled session with a trainer, it is self-paced. It will not get you a card in Queensland or the NT.
  4. Have your USI ready. Nationally recognised training needs a Unique Student Identifier, free from usi.gov.au. An accredited provider should ask you for it before you train.

If you already hold a card and simply cannot find it, you do not need a course. See how to find your white card number.

Frequently asked questions

Can I do my white card online in QLD?

Yes, if it is a live class with a trainer, you are physically in Queensland, and the RTO is approved by Workplace Health and Safety Queensland for connected real-time delivery. The session must have no self-paced or pre-recorded teaching content, at least 4.5 hours of training and no more than 15 students per trainer. Self-paced online courses are not accepted.

Is an online white card valid in the Northern Territory?

From 1 July 2026, yes, if it is delivered live over video by an RTO that NT WorkSafe has approved for connected real-time delivery. Self-paced e-learning is still not accepted. You then apply to the Territory Business Centre within 60 days and pay $31.

Can I do my white card online in Tasmania?

WorkSafe Tasmania requires the training to be delivered by an RTO and completed in Tasmania, and does not publish a rule on online delivery. If you are in Tasmania, confirm with WorkSafe Tasmania before booking an online option.

How many hours is a white card course?

Queensland requires at least 4.5 hours of training, not counting registration, identity checks or breaks. The NT and Tasmania do not publish a minimum. Our face-to-face course runs for six hours in one day.

How long does it take to get my white card?

In Queensland, your RTO issues the card once you pass, with no government application. In the NT, online applications to the Territory Business Centre are processed within 20 business days. In Tasmania, allow up to 60 days after lodging at Service Tasmania.

Will my Queensland white card work in the NT or Tasmania?

Yes. NT WorkSafe recognises valid interstate cards, and WorkSafe Tasmania recognises Queensland white cards issued after June 2009 and all Queensland blue cards.

Book your white card course

We deliver CPCWHS1001 live online with a trainer for $85, approved for connected real-time delivery in Queensland and the Northern Territory. You need to be physically in Queensland for a Queensland session. Tasmanian learners must complete the training in Tasmania and should confirm with WorkSafe Tasmania before booking online. In the NT and Tasmania, you pay the government card fee ($31 or $13.72) when you apply for your card.

Prefer a classroom? Our face-to-face courses run in Queensland, Darwin and North Hobart.

Have your USI and photo ID ready, then find a white card course near you.

The content on this website offers general insights regarding health conditions and potential treatments. It is not intended as, and should not be construed as, medical advice. If you are facing a medical emergency, dial 000 immediately and follow the guidance provided.

Recent Posts

North Hobart